wow2000.com
JNF10KHF-AS-V2 10 kW Off-Grid Hybrid Inverter
10 KW OFF-GRID HYBRID INVERTER
Custom System Design: tailored to your load profile, required autonomy, and site conditions.
Equipment Supply and Integration of compatible 48 V batteries and off-grid inverter equipment.
Technical Commissioning and Maintenance: including installation support, system configuration, and firmware checks.
User Training and After-Sales Support: covering monitoring setup, operating guidance, and troubleshooting support.
Scalable System Expansion using approved parallel inverters or battery banks when requirements grow.
Specifications
Get a Quote
JNF10KHF-AS-V2
JNF10KHF-AS-V2 Overview
The JNF10KHF-AS-V2 is a 10 kW off-grid hybrid inverter for solar systems using a 48 V battery. It coordinates power from the PV array, battery, and, depending on the selected configuration, a utility or generator input. The output shown on this page is 120 V single-phase or 240 V split-phase. It should not be confused with three-phase output.
Model: JNF10KHF-AS-V2 · Rated output: 10,000 W · Peak output: 20,000 W · Battery: 48 V DC · Last updated: August 19, 2026.
Key Selection Points
- 120/240 V split-phase output: confirm the circuit distribution and appliance compatibility before ordering.
- 20 kW peak output: this reserve supports the startup of certain loads; motor type, starting current, surge duration, and other simultaneous loads are still required for system sizing.
- 48 V DC battery input: validate the chemistry, capacity, permitted current, BMS, and communication protocol for the selected battery.
- Stated 10 ms transfer time: actual continuity depends on the operating mode and each device’s ride-through tolerance. This value does not automatically make the inverter an IT-grade UPS.
- Parallel operation: up to six compatible units may be used in an approved architecture with the required accessories, cabling, settings, and protection devices.
Technical Specifications
| Specification | Displayed Value |
|---|---|
| Model | JNF10KHF-AS-V2 |
| Type | Off-grid hybrid inverter |
| Rated Output Power | 10,000 W |
| Maximum Peak Output | 20,000 W |
| Rated Output Voltage | 120 V single-phase / 240 V split-phase |
| Stated Motor-Load Capacity | 6 metric hp (CV), subject to the load’s starting characteristics |
| Rated Frequency | 50/60 Hz |
| Output Waveform | Pure sine wave |
| Stated Transfer Time | 10 ms, depending on the mode and load |
| Battery | 48 V DC |
| Parallel Units | Up to 6 compatible units |
| Stated MPPT Tracking Efficiency | 99.90% |
| Stated Maximum Battery Conversion Efficiency | 92% |
| Stated Ambient Temperature Range | −10 °C to 55 °C; confirm derating conditions |
Compatibility and System Sizing
Inverter power alone does not define the system. To prepare a configuration, list each appliance, its active and apparent power, power factor, starting current, operating hours, and the loads that must remain powered first. PV array power, string voltages, input currents, MPPT range, and DC protection are then checked against the planned solar array.
The 48 V battery selection accounts for daily energy, required autonomy, depth of discharge, losses, reserve, BMS current, and ageing. If utility power or a generator is used, the quotation specifies the connection topology, source priority, input limits, earthing, residual-current protection, isolation, and any bypass arrangement.
Applications
- homes and residences with priority circuits and 48 V storage;
- shops, offices, and small technical sites requiring hybrid solar power;
- motor loads after checking rated power and starting current;
- expandable systems using compatible parallel units after review of the complete architecture.
Estimated Price in Gabon
1,500,000 to 2,700,000 XAF, depending on the accessories, protection devices, and system configuration. This estimate, dated August 19, 2026, does not automatically include delivery, installation, electrical work, batteries, panels, or unlisted options. The written quotation states the model, quantities, included scope, tax treatment, and validity period.
Prepare Your Quote Request
Specify model JNF10KHF-AS-V2, quantity, project city, required voltage, load list, any motors, planned battery, PV array, utility or generator availability, and target date. This information supports a compatibility check before the equipment is confirmed.
Request a quote for the JNF10KHF-AS-V2 or contact WOW2000 to submit the project data.